Vinten Radamec AutoCam Multicontroller II - Manual (Page 28)

MultiController II Operation
2-6 User Manual
Numeric Keypad
Used to enter shot numbers, and configuration settings. In conjunction with the
Shift function, buttons 1 through 4 toggle the state of the four Control functions.
In conjunction with the Shift function, button 0 selects the Calibration mode.
Control Function LEDs
Four on/off control signal lines can be used to toggle external devices that are
connected at the head. These LEDs indicate the on/off status for the four Control
functions.
Range Limits
The pan and tilt ranges for each head can be restricted at the controller to pre-
vent the heads from hitting obstacles or for other reasons. The LEDs turn on to
indicate that a controller limit has been reached and that the head cannot move
any further in that direction. The recessed switches are used to activate the limit
setting mode as described in Chapter 3.
Alt Button
The recessed Alt button is used in conjuction with other keys during system
configuration and calibration - see Chapters 3 and 4.
Control Function
ALT
Button
Range
Limits
LEDs
Numeric
Keypad