Vinten Radamec AutoCam Multicontroller II - Manual (Page 27)

MultiController II Operation
User Manual 2-5
Camera Select
The row of six buttons (CAM 1 through CAM 6) selects the camera to be con-
trolled. The green LED beside the button for the selected camera will be lit. If
the switcher tally output has been connected to the MultiController II, the red
LED will light to denote the on air camera.
Display Windows
For each camera, a two character display indicates the shot number for saving
and recalling shots. The display is also used for configuration during installation
- see Chapter 3.
Shot Functions
The group of buttons in the upper right of the control panel are used for storing
and recalling shots as described later in this chapter. The LED adjacent to the
SAVE/STOP button will be on if the currently selected head is moving to a new
shot during a Move or Jump transition. When the new shot is reached, the LED
turns off. In addition, if the head is at a recalled shot (LED off) and you trim the
pan, tilt, zoom or focus, the LED turns on to indicate that the head is no longer
positioned at that shot.
On Shot LED
This LED will be On if the currently selected camera is not positioned at the
recalled shot that is displayed for that camera. In other words, the LED will be
On if the selected camera is in a Jump or Move to a new shot, or if the camera
has been trimmed away from the recalled shot using the joystick.
Display Shot
Camera
Select
Windows Functions
On Shot LED