Welch Allyn CP 200 12-Lead Resting Electrocardiograph - User Manual - Manual (Page 36)

32 Chapter 3 Reviewing the System Settings Welch Allyn CP 200 Electrocardiograph
Reviewing the Connectivity Settings
See also “Configuring the Electrocardiograph for Wireless Communication” on page 36.
1. Press the Menu key .
2. Choose System Settings > Connectivity Settings.
The following screen appears.
Figure 21. “Connectivity Settings” Screen
3. Select the desired item. Note that Auto Send and Auto Save cannot both be on.
Item Description
Connectivity Mode Wired (USB), wireless, or none.
Network Settings DHCP, IP address, subnet mask, gateway.
Wireless Settings SSID, authentication mode, encryption, authentication type, network key,
802.11 authentication.
Auto Send
(ECG or Spirometry) Workstation, memory card, or off. Automatically sends all ECGs (except stat ECGs)
to the option of your choice. Systems with the spirometry option have separate
Auto Send settings for ECG mode and spirometry mode.
If set to memory card, an SD memory card or removable USB storage device must be
in place during testing.
If set to workstation, either wireless communications must be configured or a USB
cable must connect a CardioPerfect workstation to the electrocardiograph’s Com port
B (
).
Auto Save (ECG) On or off. Applies to ECG mode only; spirometry tests are always automatically
saved. When on, the electrocardiograph automatically saves all ECGs (except stat
ECGs) to its test directory. When off, every time you print an ECG test you are asked
if you want to save. For a description of the test directory, see
“Managing Saved
Tests In the Test Directory” on page 70.
View Available Networks Displays all available wireless networks within range.
Test Connectivity Settings Tests the network and wireless parameters.
•
Ping Test pings an IP address.
• Server Test verifies the connection to a CardioPerfect workstation.
Connectivity Settings
1 Connectivity Mode
2 Network Settings
3 Wireless Settings
4 Auto Send (ECG)
5 Auto Send (Spirometry)
6 Auto Save (ECG)
7 View Available Networks
8 Test Connectivity Settings
0 Previous Menu
9:17AM Oct 16 08