To review or edit the user list – Welch Allyn CP 200 12-Lead Resting Electrocardiograph - User Manual User Manual
Page 81
Directions for Use
Chapter 6 Performing Administrative Tasks
77
To Review or Edit the User List
1.
Press the Menu key
.
2.
Choose System Settings > Device Administration.
If prompted to log in, enter an administrator-level user ID and password.
3.
Choose User List.
The user list appears.
4.
Press the desired softkeys.
Note
If no administrator-level password has been assigned, the system’s default
user ID and password — available from Welch Allyn — works here.
These defaults exist solely to provide access to the user list in the event that
user login is enabled before an administrator is assigned.
Softkey
Effect
Add
Lets you add new users. For each user, provide the following information:
•
User ID (1 to 10 characters)
•
Password (5 to 10 characters, displayed as asterisks for security)
•
Password Expiration
- Never
- 180 days
•
User’s Name
•
User Level
- User
- Administrator
•
Active?
- Yes (user cannot be replaced)
- No (user can be replaced when list is full)
Edit
Lets you edit the information for the highlighted user.
Exit
Returns to the Device Administration screen.