Welch Allyn CP 200 12-Lead Resting Electrocardiograph - User Manual User Manual
Page 71
Directions for Use
Chapter 5 Performing ECG Tests
67
To Choose a Patient from the Scheduled Patients List
1.
From the Enter New Patient screen (
Figure 37
on page 57), press Schedule.
If prompted to log in, enter your user ID and password.
The electrocardiograph searches its own scheduled patients list. If there is no
scheduled patients list, then it searches for orders in a connected EMR system (if any)
via a Welch Allyn HL7 interface. If one or more scheduled patients match your entry,
their names appear.
Figure 45. “Scheduled Patient List” Screen (for Recalling Data)
2.
Highlight the desired name. Press Select.
The next screen in your procedure appears. Most of the patient’s data is automatically
filled in. Some data fields — medications, blood pressure, comments, history, height,
weight — will be blank because this information varies over time.
For ECG tests, go to
Step 4
on page 58. For spirometry tests, see the spirometry
manual.
Note
The other two softkeys exit this search:
•
New Patient returns to the Enter New Patient screen. See
Figure 37
on
page 57.
•
Search brings up the Search for Patient screen. Go to
“To Search by
Entering a Patient’s Name or ID”
on page 65.
Scheduled Patient List
New
Patient
Patient ID
Select
9:17AM Oct 16 08
Patient Name
Search
Today’s scheduled patients.