MK Diamond MK-101 Lowes - Manual (Page 16)

16
TRaNSPORT
The MK-101 is designed with a rigid frame and removable Cutting Head. Two people are
required to transport the MK-101 with the Cutting Head installed. The Cutting Head must be
removed first, if one person is transporting the saw (see Cutting Head Installation and Removal
in the following section).
To lift the saw using two people, each person will grasp the front and back of the frame. To lift the
saw using one person, remove the Cutting Head first, and then grasp the front and back of the
frame. Transport the Cutting Head and the Frame separately.
Cutting
Head
Lift Point
Lift Point
1. The MK-101 weighs approximately one-hundred five (105) pounds; use care when
transporting.
2. Never transport the MK-101 with water in the Water Pan.
CaUTiON
MK-101 TRaNSPORT