MK Diamond MK-101 Lowes - Manual (Page 20)

20
MK-101 SeTUP
Prior to beginning work, a pre-start inspection of the saw should be preformed.
(A)
Ensure the ON/OFF Switch
is in the OFF position
(B)
Verify the Movable Cutting
Table moves freely
(C)
Inspect the Diamond Blade for
damage. Verify the blade is cor-
rect for the material being cut
PRe-STaRT iNSPeCTiON
(D)
Inspection the Pump Assem-
bly for damage. Ensure the
cord is free of cracks of cuts
(E)
Inspect the MK-101 for
damage. Ensure the cord is
free of cracks or cuts