MK Diamond MK-101 Lowes - Manual (Page 31)

31
MK-101 MaiNTeNaNCe
MONTHlY MaiNTeNaNCe CONT.
(G)
Remove the Blade Guard.
Lubricate the Blade Guard
Pivot Shaft
(H)
Remove the Cutting Head (See
Adjusting the Cutting Head)
(I)
Lubricate the threads on the
Cutting Head Adjustment
Tri-Knob
(J)
Lubricate the Cutting Head
Adjustment Knob retaining
holes
(K)
Lubricate the Cutting Head
Pivot Shaft
If flow to the diamond blade requires adjustment, perform the following actions.
FlOw aDJUSTMeNT
(A)
Increase cooling flow by
releasing the Flow Adjusting
Clamp
(B)
Reduce cooling flow by
pressing down on the flow
Adjusting Clamp
NOTe: