MK Diamond MK-2000 Gas Saws - Manual (Page 26)

26
(H)
Move the Throttle Lever to
lower blade speed. Refer to
your specific engine manual.
turn OFF saw.
(J)
Raise Cutting Head and lock into
place. Refer to Engine Manual for
complete shutdown procedure.
(G)
Slowly push piece toward the
blade – continue until the
cut is complete.
(I)
Unlock Cutting Head.
MK-2000 GAS SAW OPERATION
NORMAL ENGINE SHUTDOWN
(A)
Move the Throttle Lever to
lower blade speed.
(B)
Place Engine Switch in the OFF
position. Refer to Engine Manual
for complete shut down procedure.
NOTE: Refer to engine manual for proper engine operation of your specific saw.