Mk-2000 gas saw maintenance, Warning – MK Diamond MK-2000 Gas Saws User Manual

Page 34

Advertising
background image

34

Fill throat

Upper Limit

1. Gasoline is highly flammable and explosive. You can be burned or

seriously injured when handling fuel.

2. To fuel, stop engine if running and allow it to cool.

3. Refuel in a well-ventilated area.

4. Keep gasoline away from appliance pilot lights, barbecues, electric

appliances, power tools, etc.

5. Wipe up spills immediately.

1. Fuel can damage paint and plastic. Be careful not to spill fuel when filling the fuel

tank. Damage caused by spilled fuel IS NOt covered under the warranty.

2. DO NOt use stale or contaminated gasoline or an oil/gasoline mixture.

3. If using the Universal Stand with the MK-2000 Gas Saw, a ladder meeting OSHA

specification is recommended.

MK-2000 GAS SAW

MAINTENANCE

CHECK FUEL LEVEL

WARNING

NOTES:

(A)

Remove Fuel Cap.

(B)

Check Fuel Level. If level is 1/2

full or greater, go to Step D.

(C)

Fill Fuel tank until level is

below throat.

(D)

Install Fuel Cap. DO NOT

over-tighten.

Refer to Engine Manual for proper engine operation of your specific saw.

Advertising