MK Diamond MK-2000 Gas Saws - Manual (Page 30)

30
MK-2000 GAS SAW MAINTENANCE
the following should be performed monthly. Items should be lubricated as directed.
MONTHLY MAINTENANCE
(A)
Remove and clean Diamond
Blade Outer Flange and
Retaining Bolt.
(B)
Verify all engine mounting bolts
are tight.
(C)
Verify engine adjustment Straps
are tight.
(D)
Check movable Cutting Table
Roller Wheels for wear.
(E)
Clean engine air filter.
Refer to Engine Manual.
Perform the following maintenance every six months.
SIX (6) MONTH MAINTENANCE
(A)
Change engine oil. Refer to
Engine Manual for all required
engine maintenance.