Pilz PSEN op4F-A-14-180/1 - Manual (Page 26)

PSEN op4F/H-A series OPERATING MANUAL
26 1003067-EN-02
PSENopt Advanced RX Blanking
18
pin
M12 12 pin
M12 12-Pin:
1. 24 V (brown)
2. 0 V (blue)
3. RESET/RESTART/ALIGN (white)
4. TEACH IN (green)
5. OSSD2 (pink)
6. EDM (yellow)
7. NC (black)
8. OSSD1 (grey)
9. TOLERANCE (red)
10. LAMP (purple)
11. NC (grey-pink)
12. EARTHING (red-blue)
PSENopt Advanced TX
18
pin
M12 5 pin
M12 5-Pin:
1. 24 V (brown)
2. TEST (white)
3. 0 V (blue)
4. EARTH (black)
5. REDUCED RANGE (grey)
Assignment of M12 connector
12-pin 5-pin
PSENopt Advanced RX Muting
CONNECTION LINE BEHAVIOUR
RESET
24Vdc
IN line N.O.
Is connected – when in disabled state the
RESET/RESTART/ALIGN button is operated
RESTART
24Vdc
IN line N.O.
Is connected – when during operation the
RESET/RESTART/ALIGN button is operated
ALIGNMENT
24Vdc
IN line N.O. Has to be set to 24 V DC at startup
OVERRIDE 1
24Vdc
IN line N.O.
Is connected – when Override is active during
operation
OVERRIDE 2 IN line N.O. No voltage – during operation
EDM
See section 7.4 for
connections Must be non-equivalent to OSSD during operation
with EDM enabled
MUTING
DEACTIVATION
24Vdc
IN line N.O. Muting is disabled when connecting