Pilz PSEN op4F-A-14-180/1 - Manual (Page 66)

PSEN op4F/H-A series OPERATING MANUAL
66 1003067-EN-02
• FIXED blanking
The panel on the right shows the settings for the active blanking zone (in the example
shown below, the active blanking zone is 3 beams in size and is 7 beams from the bottom
of the light curtain; no tolerance is set).
• FIXED blanking with increased tolerance (top
or bottom )
The example shown below illustrates the settings with fixed blanking and an increased top
tolerance: only fixed blanking zones are permitted above this zone; fixed blanking zones as
well as zones with total surveillance are permitted below this zone.