Canon PIXMA MP560 - Manual (Page 26)

4.
Close the Card Slot Cover.
Removing the Memory Card
Important
If you used the Card Slot as the memory card drive of a computer, you must perform the "safe
removal" operation on your computer before physically removing the memory card from the
machine.
- In Windows, if you are connecting the machine with a USB cable, right-click the removable disk
icon and click Eject. If Eject does not appear on the screen, make sure that the Access lamp is
lit, and then remove the memory card. If you used the Card Slot via the LAN, you do not need to
perform the "safe removal" operation on your computer.
- In Macintosh, drag (Mount drive) into the Trash.
1.
Open the Card Slot Cover.
2. Make sure that the Access lamp is lit, and remove the memory card.
Hold the part of the memory card that is protruding and remove it straightforward from the machine.
Important
Do not remove the memory card while the Access lamp is flashing. The Access lamp flashes
while the machine is reading or writing data from/to the memory card. If you remove the
memory card or turn off the power while the Access lamp is flashing, the data saved on the
memory card can be damaged.
3.
Close the Card Slot Cover.
Page top
Page 26 of 949 pages Inserting the Memory Card