Canon PIXMA MP560 User Manual

Page 436

Advertising
background image

Advanced Guide

>

Scanning

>

Forwarding Scanned Data to PC Using the Operation Panel of the Machine

> Forwarding

Scanned Data to PC Using the Operation Panel of the Machine

Forwarding Scanned Data to PC Using the Operation Panel of
the Machine

You can forward scanned data to PC using the Operation Panel of the machine.

Before forwarding scanned data to PC, confirm the following:

The necessary application software (MP Drivers and MP Navigator EX)

are installed.

If the application software (MP Drivers and MP Navigator EX) are not yet installed, insert the Setup
CD-ROM

into the computer's disc drive, then perform Custom Install and select MP Drivers and MP

Navigator EX.

The machine is connected to a computer correctly.

Make sure that the machine is connected to the computer correctly.

Do not plug or unplug the USB or LAN cable when scanning images with the machine, or when the
computer is in sleep or standby mode.

If you perform scanning via the LAN connection, make sure that all the required settings have been
specified. For details, refer to

Network Scan Settings

.

The operation after scanning the original is specified in MP Navigator

EX.

MP Navigator EX enables you to specify the response resulting from pressing the

Color or Black

button on the machine. You can specify the response individually for each event. For details, refer to

Selecting a Response to Commands from the Operation Panel Using MP Navigator EX

.

1.

Set the starting application.

If you are using Mac OS X v.10.5.x or Mac OS X v.10.4.x:

This operation is not necessary.

If you are using Mac OS X v.10.3.9:

You need to set MP Navigator EX as the starting application software in Image Capture under

Applications of Mac OS X.

Select Applications on the Go menu, then double-click the Image Capture icon. Click Options at the
lower left of the scanner window, select MP Navigator EX 3 in Application to launch when the
scanner button is pressed:, then click OK. To quit Image Capture, select Quit Image Capture on the
Image Capture menu.

Important

If Options is not displayed, select Preferences on the Image Capture menu, click Scanner, and
click Use TWAIN software whenever possible to clear the option. Then quit Image Capture and

restart it.

2.

Make sure that the machine is turned on.

3.

Load the original on the Platen Glass.

Note

Refer to

Placing Documents

for how to load the original on the Platen Glass.

Page 436 of 949 pages

Forwarding Scanned Data to PC Using the Operation Panel of the Machine

Advertising