Canon PIXMA MP560 - Manual (Page 922)

Advanced Guide > About Network Communication > Troubleshooting > The Following Screen Is Displayed During Setup
The Following Screen Is Displayed During Setup
The Enter Password Dialog Box Is Displayed During Setup
The Dialog Box for Setting the Encryption Is Displayed After Selecting the Access Point in the Search
Dialog Box
"You are connecting the machine to the non encrypted wireless network" Is Displayed
The Enter Password Dialog Box Is Displayed During Setup
The following dialog box is displayed if an administrator password is set to the machine which
has already been set up.
Enter the administrator password you have set.
Changing the Settings in the Admin Password Sheet
The Dialog Box for Setting the Encryption Is Displayed After Selecting the Access Point in
the Search Dialog Box
This dialog box is displayed automatically if the encryption settings are changed on the access
point. You need to change the machine's encryption settings to match those of the access point.
For information on the encryption settings, see Changing the Settings in the Wireless LAN Sheet .
"You are connecting the machine to the non encrypted wireless network" Is Displayed
Security is not configured on the access point. The machine can still be used, so continue the
setup procedure to complete it.
Important
If you connect to a network that is not protected with security measures, there is a risk of
disclosing data such as your personal information to a third party.
Page top
Page 922 of 949 pages The Following Screen Is Displayed During Setup