Canon PIXMA MP560 - Manual (Page 678)

Advanced Guide > Scanning > Other Scanning Methods > Scanning with WIA Driver
Scanning with WIA Driver
You can scan an image from a WIA-compliant application and use the image in that application.
The procedure varies depending on the application. The following procedures are examples only.
For details, refer to the application's manual.
Important
In Windows 2000, you cannot scan using the WIA driver.
In Windows XP, you cannot scan using the WIA driver via a network connection.
Complete the following settings to enable scanning over a network.
1. From the Start menu, select Network.
2. Right-click (model name) _MAC address in the displayed screen, then select Install.
Scanning with WIA Driver 2.0
The following is an example of scanning using Windows Photo Gallery.
1. Place the document on the Platen.
Placing Documents
2. In File, click Import from Camera or Scanner..., then double-click WIA Canon (model
name).
For network connection, double-click (model name) _MAC address from the list.
The scan setting screen appears.
3. Specify the settings.
Scanner
The currently set product name is displayed. To change the scanner, click Change... and select
the product you want to use.
Profile
Select Photo (Default) or Documents according to the document to be scanned. To save a new
Profile, select Add profile.... You can specify the details in the Add New Profile dialog box.
Source
Select a scanner type.
Page 678 of 949 pages Scanning with WIA Driver