Canon PIXMA MP560 - Manual (Page 940)

Advanced Guide > About Network Communication > Appendix > Initial Values Set at Factory (Network)
Initial Values Set at Factory (Network)
Item Initial Values
WLAN active/inactive Disable LAN
SSID BJNPSETUP
Communication mode Infrastructure
Wireless Security Disable
IP address Getting automatically
Printer name setting* XXXXXXXXXXXXXXX
IPv4/IPv6 setting IPv4
Set memory card sharing Enable
Enable/disable WSD (WSD settings) Active
Timeout setting (WSD settings) 1 minute
LLTD setting Enable
Enable/disable Bonjour (Bonjour settings) Enable
Service name (Bonjour settings)* Canon XXX series _XXXXXXXXXXXX
LPR service advertising (Bonjour settings) OFF
LPR protocol setting Enable
* The initial value in this item varies by machine. You can check the value in this item using the Operation
Panel on the machine.
Page top
Page 940 of 949 pages Initial Values Set at Factory (Network)