Canon PIXMA MP560 - Manual (Page 33)

Select the page size of the paper to print: A4, 8.5"x11" (LTR), etc.
(4) Media type
Select the media type of the paper to print: Plain paper, Plus Glossy II, etc.
Note
If you do not select the page size and media type correctly, the machine may feed paper
from the wrong paper source or may not print with the proper print quality.
See
Paper Source to Load Paper .
(5) Print quality
Adjust the print quality according to the original to copy: High(quality-priority), Standard, etc. The available
print quality settings depend on the paper selected for Media type.
(6) Paper source
The paper source for the selected page size and media type appears on the screen.
When A4, B5, A5, or Letter-sized plain paper is selected, Cassette will appear.
When other sizes or types of paper are selected, Rear tray will appear.
Confirm that the selected paper is loaded in the paper source displayed on the screen.
For details on the paper source setting, refer to the on-screen manual: Advanced Guide .
Note
If Two-sided copy is selected, select A4 or 8.5"x11" (LTR) for Page size and Plain paper for
Media Type.
If 2-on-1 copy or 4-on-1 copy is selected, select A4 or 8.5"x11" (LTR) for Page size.
If Borderless copy is selected, select 8.5"x11"(LTR), A4, 4"x6"(10x15cm), or 5"x7"(13x18cm)
for Page size and any types of paper except Plain paper for Media type.
If Borderless copy is selected, slight cropping may occur at the edges since the copied image
is enlarged to fill the whole page.
The settings of the page size, media type, print quality, automatic intensity, etc. are retained,
and these settings will appear next time when the Copy menu is selected even if the power is
turned off and on.
Combination of some items cannot be specified depending on the function.
If you select Fast (speed-priority) with the media type set to Plain paper and the quality is not
as good as expected, select Standard or High(quality-priority) and then try copying again.
Page top
Page 33 of 949 pages Making Copies