Lan settings, Wlan active/inactive, Wireless lan setup – Canon PIXMA MP560 User Manual

Page 757: Confirm lan settings

Advertising
background image

Advanced Guide

>

Changing the Machine Settings

>

Changing the Machine Settings on the LCD

> LAN settings

LAN settings

WLAN active/inactive

Activates/deactivates wireless LAN.

Wireless LAN setup

Selects the setting method for wireless LAN connection.

Note

You can enter this setting menu by following the procedure below:
1. Select Settings on the HOME screen, then press the

OK

button.

2. Select Wireless LAN setup.
In this case, activate wireless LAN.

Easy settings
Select when you perform settings for wireless LAN manually.
WPS settings
Select when you perform settings for wireless LAN using Wi-Fi Protected Setup (WPS). Select
Push button method or PIN method according to the method your access point supports, then
follow the on-screen instructions.
WCN settings
Select when you perform settings for wireless LAN using Windows Connect Now (WCN)
feature. You need a USB flash drive on which settings for wireless LAN are saved.

Confirm LAN settings

The list of wireless LAN settings of this machine is displayed on the LCD.
You can print the list from this setting menu.

Wireless LAN setting list
The list of wireless LAN settings of this machine is displayed on the LCD.
The following setting items are displayed.

Items

Setting (IPv4)

Setting (IPv6)

Connection

Active/Inactive

Active/Inactive

SSID

XXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXX

XXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXX

Communication
mode

Infrastructure

Infrastructure

Channel

XX

XX

Wireless LAN
security

Disable/WEP(64bit)/WEP(128bit)/

WPA-PSK(TKIP)/WPA-PSK(AES)/
WPA2-PSK(TKIP)/WPA2-PSK(AES)

Disable/WEP(64bit)/WEP(128bit)/

WPA-PSK(TKIP)/WPA-PSK(AES)/
WPA2-PSK(TKIP)/WPA2-PSK(AES)

IP address

XXX. XXX. XXX. XXX

XXXX: XXXX: XXXX: XXXX: XXXX: XXXX:
XXXX: XXXX

Subnet mask

XXX. XXX. XXX. XXX

-

Subnet prefix

length

-

XXX

Default gateway

XXX. XXX. XXX. XXX

XXXX: XXXX: XXXX: XXXX: XXXX: XXXX:
XXXX: XXXX

MAC address

XX:XX:XX:XX:XX:XX

XX:XX:XX:XX:XX:XX

IPsec setting

-

Enable (ESP)/Enable (ESP & AH)/
Enable (AH)/Disable

Pre-shared key

-

XXXXXXXXXXX

Page 757 of 949 pages

LAN settings

Advertising