Panasonic SC-CH350 - Manual (Page 14)

Front Panel Controls and Functions
(continued)
•According to the area,
there is a set with ® DAT
instead of (E> PHONO.
■SOiBJS
Amplifier section
® Power “STANDBY ci)/ON” switch
(POWER, STANDBY ([)/ON)
This switch switches ON and OFF the secondary circuit power
only. The unit is in the "standby” condition when this switch is
set to the STANDBY (1) position. Regardless of the switch
setting, the primary circuit is always “live” as long as the
power cord is connected to an electrical outlet.
0 Equalizer mode select button
(-EQ MODE, -FIXED/USER)
This is used to select the equalizer mode. If you press and
hold this button, the equalizer mode (FIXED or USER) will be
switched.
@ Equalizer level-control buttons (EQ LEVEL)
These buttons are used to adjust of the equalization level.
0 Volume level control (VOLUME)
Turn to adjust the volume level.
Note that — dB is the lowest volume setting and 0 dB is the
highest.
® Volume preset button (VOL. PRESET)
Use to preset volume for timer play.
® Remote control signal sensor (SENSOR)
Receives the signals from the remote control.
0 V. bass button (V. BASS)
Press to boost the dynamic low-frequency ranges.
0 Equalizer ON/FLAT button
(EQ, -ON/FLAT, -DEMO)
This button is used to switch the equalizer on or flat, if you
press and hold this button, sound effects will be sequentially
changed (Demonstration function).
0 Input select buttons
(PHONO, TAPE, CD, TUNER)
Press to select the sound source.
(@ Display mode select button
(DISPLAY, -SPECTRUM, -MODE)
This button is used to select one of five spectrum curves. If you
press and hold this button, the display mode wilt change.
® Surround button (SURROUND)
This button is used to activate the surround sound effect.
@
Karaoke button (KARAOKE)
This button is used to perform "karaoke” (making microphone
mixing with an accompaniment).
® Microphone volume control (MIC VOL.)
This control is used to adjust the microphone volume level.