Mw allocation settings, About one touch tuning, Listening to radio broadcasts – Panasonic SC-CH350 User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Listening to Radio Broadcasts
Manual tuner operation
(to tune to broadcasts by using the jog dial)
1
Press the band-select button to select FM, LW
or MW.
The display will show which band you selected.
Received band Received frequencies
'C t^'i'
v o r n '
i 1 t
_t i_' LJ LJ uHi
2
Turn the jog dial to tune in the desired broad
cast.
The display will show the frequency to which you have tuned.
•If you have tuned in an FM stereo broadcast, the FM stereo
indicator will appear.
Quartzlock indicator
■ MW allocation settings
This unit comes equipped with an electronic digital tuner that di
vides the broadcast band into many small steps. These steps match
the assignable broadcast frequencies and intervals in between.
Each country allocates (assigns) broadcast bands according to their
particular needs.
When the band select button is pressed for about 3 seconds, the
MW frequency step will change to 9 or 10 kHz per step.
In order to return to the original frequency indication, press this
button for about 3 seconds again.
■ About one touch tuning
From the power standby condition, you can listen to radio broadcast
by pressing TUNER on the amplifier section.
You can receive the station last tuned in when the power was
switched to standby condition.
I TUNER ^
21