Panasonic SC-CH350 - Manual (Page 37)

■ When you record from the compact discs
After pressing REC PAUSE;
Press the CD input select button and the CD play
button.
The recording wilt automatically start when you press the CD play
button (Synchro start function).
■ To briefly interrupt recording
(Also available from the remote control)
Press REC PAUSE.
REC PAUSE
The cassette deck will go into the pause mode.
To resume recording, press the play button corresponding to the
direction in which recording is taking place.
■ To stop recording
(Also available from the remote control)
Press the cassette deck stop button.
1 ° I
■ To erase a recorded tape (Deck 2)
When you make a new recording on a previously recorded tape, the
new recording will automatically erase what was previously re­
corded. To erase a tape without making a new recording, follow the
steps below.
(Steps 5 and 6 also available from the remote control)
1) Press the TAPE input select button on the amplifier.
2) Press DOLBY NR so that Dolby NR is turned off.
3) Insert the recorded tape into the cassette holder of deck 2.
4) Select the desired reverse mode.
5) Press REC PAUSE.
6) Press the playback button corresponding to the side to be
erased.
■ To record with straight sound tone
Please complete the next steps.
• Press EQ ON/FLAT on the amplifier section to light the EQ FLAT
indicator.
•Press SURROUND to disappear the SURROUND indicator.
• Press KARAOKE to disappear the KARAOKE indicator.
■ To record with desired tone
You can make a recording with the equalizer effect.
When playing back such recordings, press EQ ON/FLAT on the
amplifier section to set “EQ FLAT”.
■ To use the beat proof function
Press FM MODE/B.P on the tuner section.
FM MODE/B.P
When recording an LW/MW broadcast, use the beat proof button to
reduce unwanted “beat” signals (whistle). Press the FM mode/beat
proof button to whichever position (BP 1, BP 2 or BP 3) best
reduces these beat signals. The display will indicate which position
is in effect.
37