Panasonic SC-CH350 - Manual (Page 54)

Using the Timer
(continued)
To use the sleep timer
You can use this timer function to switch the power to the standby
mode at a desired time (within a range of 1 minute to 120 minutes
from the present time). Use the sleep timer to switch the power to the standby mode
automatically in case you fall asleep while listening.
0 \ [ 1
1 ■
on ------------
0 «/. I r 1—IrTinoO
icrm 1 '^J
n o 0
c .
-1 - iL-l
/ SLEEP I
OQQQO
o 'S S S3
^ II ■ caacDaa
4 ■ 44 »#-
□ □□□□
(Step 4 also available from the remote control)
Switch on the power.
1 Press CLOCK/TIMER while the sound source
is playing.
2 0 Turn the jog dial to select SLEEP.
The display will return to the previous indication after
10 seconds. Please finish setting within 10 seconds.
C / C C O
- I L i_ C I
O
Cl r c O 71-n n
-t /_ /_ /_ /■ c-u u
CD Press SET.
3 0Turn the jog dial to set the length of time
you would like the system to operate before
it shuts off (sleep time).
O : 0:01-0:02-0:03-0:04..,
: 2:00-1:59-1:58-1:57...
(D
Press SET.
The display will return to the previous display,
4 Press SLEEP.
The sleep timer indicator will appear.
r 77 n /■
i_ ± 1 O t -
SLI
/ c
1 _i
Qsl El S2
Lights
Above display shows the sleep timer setting on the CD player.
The sleep time set by the steps above remains in the system’s
memory.
If you want to operate the system again on the same sleep time, you
only need to press SLEEP.
■ To confirm the time remaining on the sleep
timer
(Also available from the remote control)
Press SLEEP.
SLEEP I ---------- 1 y SLEtP
/ SLEEP I /a
Approximately 5 seconds after you activate the sleep timer, the
display will return to show the mode display. If you press SLEEP in
this mode, the display will show the time remaining on the sleep
timer for approximately 5 seconds.