Panasonic SC-CH350 - Manual (Page 41)

8 0 Turn the jog dial to select the length of the
tape you are using.
(D Press SET.
The system assigns the tracks to both sides of the tape and
displays the results.
The time remaining on the tape side B
O C
/' L II
n- n ~l
U- U I-
[EPiTiramifn (iimsiTiiBEmdiHsiiEii
Tracks that will fit on both sides
To confirm the time remaining and the tracks to be recorded
on tape side A, press CD EDiT.
Each time you press the button, the display wiii change as
foilows:
1. The time remaining and the tracks to be recorded on tape
side A
2. The time remaining and the tracks to be recorded on tape
side B
3. The time remaining and the tracks to be recorded on both
sides of the tape
■ To cancel tape length priority recording
(fit edit-recording)
(Also available from the remote control)
Press the CD stop button twice.
l-° I
The CLEAR display will appear,
■ To confirm the play sequence
(Also available from the remote control)
You can confirm the play sequence on the display
by pressing the skip/search button in the stop
mode.
Note:
When it is not possible to record all the tracks even by rearranging
the track sequence, the OVER display will appear.
9 Press the CD play button for automatic re­
cording.
The compact disc player automatically scans for the peak
(highest) level of the entire disc (ATLS; see page 39.) and
then recording will start.
When edit-recording has finished, the cassette deck automati­
cally enters the recording standby mode.
If you want to change something you have set, or if an error has
occurred, press the cancel button,
The system will return to the previous setting mode.
41