Panasonic SC-CH350 - Manual (Page 52)

Using the Timer
(continued)
Have you read and completed “Setting the Time
of Day” on page 19? If not, please complete these
sections before continuing.
The following example shows how to set the timer recording func­
tion for recording a broadcast from 18:30 to 20:00.
Switch on the power.
1 Press CLOCK/TIMER.
2 0 Turn the jog dial to select R-TIMER.
R-TIMER will appear on the display, after which the display
will show the timer ON and OFF time of 0:00.
•The display will return to what it was previously indicated
if you allow 10 or more seconds to elapse before you
accomplish the next operation.
n ..
I y
~ c o
X I I I - / '
n- n n n-n n
u-u u u- u u
OH OFF
0 Press SET.
The timer ON time of 0 will start flashing.
0 Turn the jog dial to select the hour you wish
timer recording to begin. In this case, set it
on 18.
The 18 will flash.
_ / d-rt n n- n n
j u-p u u- u u
OFF
(DTurn the jog dial to select the minutes you
want timer recording to begin. In this case,
set it on 30.
The 30 will flash.
1 Q- O n _ n - n n
I U - _i u u - u u
OFF
0 Press SET.
The minutes will stop flashing and the timer OFF time of 18
will start flashing.
0Turn the jog dial to select the hour you
want timer recording to end. In this case,
set it on 20.
The 20 will flash.
/ O' ~J n_ J n-Sl n
1
u- _f u L U - _/ U
ON
^ |OFF^
0 Press SET.
The hour will stop flashing and the minute will flash.
0Turn the jog dial to select the minutes you
want timer recording to end. In this case,
set it on 00.
/ n- "7 n
f O' _( U
D r i n
L U - U
n_
u
ON OFF ^ \
0 Press SET.
The 00 will stop flashing, and the display will change to the
previous display.
Press SET.
The hour will stop flashing and the minute will flash.