Panasonic SC-CH350 - Manual (Page 51)

0 Press VOL. PRESET to set the volume level
for timer play.
The volume level display will flash.
(
2
) Adjust the volume level using the volume
level control.
(3) Press VOL. PRESET again.
•This presets the volume level into memory.
6 Press one of the input select buttons.
For timer play on the CD player:
Press the CD input select button.
You can use timer play for sequential play or program play.
For program play, specify the desired tracks.
For timer play on the tuner:
Press the TUNER input select button, select the desired band,
and tune in a station.
For timer play on the tape:
Press the TAPE input select button.
You can operate both decks 1 and 2 by the timer. When you
load cassettes in both deck 1 and deck 2, deck 1 has priority
and plays first.
7 Press PLAY TIMER.
r 77
I- ±1
I u
I I
r ~i-n c
3 3 /3 3
8
Lights
The timer indicator will appear on the display.
Press POWER STANDBY (!)/ON to switch the
power to standby mode.
Play will start at the set time.
To listen to the system after you have set the timer but before
timer play has taken place:
Press the power switch to on and select the desired source. After
you have finished listening, return the system to the timer setting
mode. Even if you change the volume level after presetting the
volume level for the timer play, the timer play will start with the
preset volume level.
Notes:
• If the power is on, the timer will not function. The system must be
in the standby mode.
• If you are using the timer to play a compact disc, do not open the
disc holder if you have already programmed tracks. This will
cancel the program and play will start from the first track.
■ When you have made a wrong setting on steps
1 to 4 (on page 50)
Press CANCEL.
CANCEL o
The display will return to the previous step.
■ To confirm timer piay
Press CLOCK/TiMER in the power standby mode.
d
CLOCKfTIMER ,
Each time you press this button the display will change as follows;
1. P-TIMER—^ON time and OFF time
2. The source you selected
■ To cancei timer piay
Press PLAY TiMER.
PLAY TIMER o
The play timer indicator will go out.
The timer play will not occur, but the time ON/OFF setting for the
timer play will remain in the memory.
■ To change the timer setting
1. Press PLAY TIMER to go off the timer indicator.
2. Operate once again from step 1.
■ To change the source oniy
1. Press PLAY TIMER to go off the timer indicator.
2. Select the desired source.
3. Press PLAY TIMER to light the timer indicator.
4. Press the power switch to be in the standby mode.
■ To use the play timer everyday
If you don’t change the timer setting, the timer play will start with the
preset condition (in the standby mode only).
51