Setting the recording timer, To release the tirher function, To check what has been programmed – Panasonic RXDS05 User Manual
Page 56: To enjoy play after programming: (after step 6), Using the timer at the same time every day
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting the
Recording Timer
(Continued)
To release the tirher function:
(only when the urtit is on)
Press TIMER and clear the timer recording
display.
The timer does not operate but the time
setting is stored in thè memory.
To
check
what
has
been
pro
grammed:
Press •CHECK/« ADJUST (TIMER).
The display changes automatically as
follows:
1. Programmed tinie
2. Programmed source
3. Volume level during operation
To enjoy play after programming:
(after step 6)
1. Start playing the desired sound source.
2. After play, turn the unit off before timer
recording starts.
Even if you change the volume level or
sound source, whatever was programmed is
restored at the recording time.
Using the timer at the same time
every day:
First check that TIMER-REC appears on the
display and then turn the unit Off.
El
To change the station to be recorded:
Press TIMER to turn off the “TIMER-REC”
display, and then perform steps 5 to 7 on
page 54.
ijgra
The timer will not operate if the unit is on.
ÉT
TIMER-REC
c
pa
i n
rjÈS
r
/ 1 oo.
l U
*
r
yes 1