Panasonic PV-D4752 - Manual (Page 11)

Displays (On screen & Multi Function)
On Screen Displays (VCR)
Function & Channel Displays
When a function button
is pressed, e.g. PLAY,
or you change
channels, a 5-second
display appears.
Blank Tape/ No Video Signal
Indications
Whenever a blank section of a tape
comes up in Play mode, or when the
selected channel has no broadcast
signal with Weak Signal Display
Feature (p. 33) set to OFF, the TV
screen will turn solid blue.
VCR Status & Clock Displays
To display or remove
overlay at right,
Function Status Current Time Channel
Rec Time Remaining
press DISPLAY.
(OTR mode only,
see p. 21.)
Broadcast Audio/
Being Received
(See p. 26.)
REC 12 ; 00 AM CH 02
0:25 - 0 : 12:34
li= STEREO ◄ SP, li^SAP ^
MONO
Counter
Tape Speed
(See p. 6.)
Multi Function Display
VCR Indicator
Lights up when the
VCR/TV selector is
set to VCR.
Power Indicator
Lights up when power is on
VCR mode Indicator
Lights up when
DECK is VCR mode.
VCR REC Indicator
Lights up during
recording.
Clock/ Status/ Channel/ Speed Display
Displays the current time. Briefly displays VCR
status when a function button is pressed. Briefly
displays the channel number, or “LI” or “L2” when
a channel or line input is selected. Briefly displays
the recording speed when SPEED is pressed.
Hi-Fi Indicator
Lights up when Hi-Fi audio
i monitored in Play mode.
AM
Lights up before noon.
PM is not displayed.
Timer Indicator
Lights up when DECK is set for
Timer Recording, or when Cne
Touch Recording (CTR) is
used. Flashes when Timer
Recording is set, but a tape has
not been inserted into DECK and
when a power interruption
occurs during Timer
Programming.
DVD mode Indicator
Lights up when
DECK is DVD mode.
ANGLE Indicator
Lights up when a scene
recorded at different
angles is detected.
See p. 37. (DVD only).
11