Panasonic PV-D4752 - Manual (Page 20)

PlayDacK/ Kecora on a lape
Ready Checklist
□ Alt connections are made (pp. 1 2 - 1 5 ) .
□ TV and DECK are plugged in.
□ TV is on and tuned to CHS, 4, or VIDEO.
□ Remote is in VCR mode. (Press VCR.)
EJECT
Playback a Tape |
1 Insert a tape.
• DECK power comes on.
The VCR mode and “VCR” indicator light up
on Multi Function Display.
Special Features During Play
I Forward/Reverse Scene Search
^ Press FF/SLOW+
or
REW/SLOW-.
-► Press PLAY
to release.
After search has begun, each additional press of
FF or REW changes speed as shown below.
[SLP] : Approx. 21X ^ Approx. 9X
[LP] : Approx. 9X Approx. 7X
[SP] : Approx. 7X Approx. 3X
If at 21X, 9X, or 7X speed the picture is
interrupted, change speed to 9X, 7X, or 3X.
Picture interruption may occur with some TVs.
FF and REW search speed may vary
depending on current tape position.
I
Still (Freeze) Picture
^ Press PAUSE/STILL.
-► Press PLAY
to release.
I
Frame by Frame Picture
Press PAUSE/STILL
In Still mode.
-► Press PLAY
to release.
I
Slow Motion Picture
Press FF/SLOW+
(Increase speed) or
REW/SLOW-
(decrease speed) in Still
mode.
-► Press PLAY
to release.
0 Press STOP
to stop a tape.
I Press REW/SLOW- or FF/SLOW+
In Stop
mode to rewind or fast forward a tape.
I Press EJECT
on remote, or
STOP/EJECT
on DECK to eject a tape.
REW^LOW-
VCR/TV —
STOP------
FF^OW+
PAUSe
STILL
Press PLAY*
to play a tape.
• If tape has no rec. tab (p. 6), auto play begins.
(T) CD
CD CD CD
__ ___ uaiBLT
GD QD CI>|
These features work best in SP or SLP mode.
The sound will be muted.
To reduce picture noise, see “Manual Tracking
Control” on p. 6.
After DECK is in Still or Slow mode for 3 minutes,
it will switch to Stop mode automatically to
protect the tape and the video head.
Playback using DECK buttons
J
II
11 n —1
r=rn ^ S b
o o
p -* ** 11^1 *
0 ” “ ~ ^
Multi Function Display
J Press STOP/EJECT to stop
and/ or eject a tape.
<Model PV-D4752 DECK shown.>
20
For assistance, please call: 1 - 600 - 21 1-PANA(7262) or send e-mail to: [email protected]