Panasonic PV-D4752 - Manual (Page 13)

Other Connections
With a Cable Box (DECK^Cable Box^TV)
D VD /V CRD EC K lANTorCAtv; jy ^NT or CAT^
IIM I
■ Connect With Two Cable Boxes
D VD /V CRD EC K
tANfl
I
or
I
|CAT^ IN ■■ -
You Can
view any
{including
scrambled)
channel.
use Remote
Control to select
channels without
using Muiti-brand
control feature.
You Can
record and view
both sorambied
andunsorambied
channels if
additional
equipment is
added.
This connection
requires: two
converter boxes,
an A/B switch,
and a 2-way
spiitter.
You Cannot
record
scrambled
channels.
You Cannot
view channel
other than the
one selected
for any type of
recording.
do a Timer
recording of a
channei uniess
you select it on
the Cabie Box.
Connections For DVD Only
(T)Conneot AUDIO OUT2 (L, R) to the AUDIO IN (L, R) of the TV. (audio input for COMPONENT
or S-VIDEO mode).
0lf your TV has COMPONENT VIDEO INPUT, set SELECT SW to COMPONENT VIDEO OUT.
If your TV does not have COMPONENT VIDEO INPUT but has S-VIDEO INPUT, set SELECT
SW to S-VIDEO OUT.
The picture will not be displayed if the SELECT SW is not set to the correct video output.
(2)When in DVD mode, set your TV to either COMPONENT VIDEO IN or S-VIDEO IN.
• You can watch DVDs through the S-VIDEO or COMPONENT VIDEO, VHF/UHF OUT TO TV,
and VIDEO OUT connections to your TV. The VCR and TUNER pictures are available only
from the VIDEO OUT and VHF/UHF OUT TO TV connections to your TV.
• PROG functions on the remote are not available when using S-VIDEO OUT and COMPONENT
Video Output. Please set TV to either RF INPUT or VIDEO INPUT, and then press PROG.
From DECK’S
AA/ OUTPUT
D VD /V CRD EC K
DVD OUTPUT
S-VIDEO OUT
I
[]
—or-
COMPONEMT
VIDEOOUT
V G-|
'■ G-
AUDIOOUT2
(5T
------IN-| — IN
-I
IN
Y
(p
pb (P
o G—
o
VIDEO
S-ViDEO
IN
13