Panasonic PV-D4752 - Manual (Page 44)

LTV LT i_QCK reaiure
You can prevent playback of DVDs of a specific
rating level which may be unsuitable for children.
• Some DVDs are encoded with a rating level. If the disc
rating is higher (stricter) than the one you preset,
playback will be prohibited.
1^ I Ready Checklist
CH DECK is in DVD mode, press DVD.
DVD Lock (DVD only)
A 4-digit code must be entered to view a blocked
program or change rating settings.
1 Press ACTION^
to display MENU.
DVD MAIN MENU
DISC LANGUAGES
AUDIO OUTPUT
STILL MODE :FIELD
TV MODE_______ .-Lsjtsfbny ^
Press AT
to select “PARENTAL LOCK,’
and
press SET to display.
ENTER 4-DIGIT CODE
END ;ACT I ON
ENTER :0-9
To Make Corrections
Press M
repeatedly to
move the cursor.
Press
NUMBER keys to
make the correction.
1) Press NUMBER keys
to enter your secret code.
2) Enter same secret code
again for confirmation.
3) Press SET to display.
• Step 2) not necessary when
changing rating or secret
code.
• Take care that you are not
observed entering the
secret code.
PAREKTALLOCK
fl3ü3W?1^
LEVEL 7 J'
LEVEL 6
LEVELS^
LEVEL 4
LEVELS
LEVELS
LEVEL 1 rf*
LEVELOirf'
SELECT
SET
END
SET
ACTION
Press AT^ ►
to select rating level, and
press SET
to select “LOCKED” or
“UNLOCKED.”
LEVEL 0 : LOCK ALL, Playback of all DVDs, CDs and
Video CDs is prohibited.
(Use to prohibit play of mature theme DVDs not
encoded with rating level.)
LEVEL 1 : mature theme DVDs
level 2 ; DVDs expressly for children can be played back.
level
3 to 7
: DVDs for general audiences/children can be
played back. (DVDs with mature content
are prohibited.)
LEVEL 8 : NO LIMIT: (Factory preset)
All DVDs can be played back.
Discs not encoded with rating
ievei wiii piay even if the jacket
states it is for mature
audiences. For these discs, the
DVD Lock Ratings wiii not work.
<When DVD Lock is actlvated>
YOUR SELECTION EXCEEDS THE
PLAYER’S RATING LIMIT.
DO YOU WANT TO CHANGE THE
LIMIT?
END : DISPLAY
After DVD Lock is set and a
blocked DVD is played, this
message will appear.
The message may differ
depending on the disc.
To continue viewing a biocked
program for now,
Press
AT to select “YES” and
SET. Then, enter your 4 digit
secret code. When “NO” is
selected, blocked programs
cannot be viewed.
Change your secret code
• You will need your current code.
Do step 1 - 2 left.
Enter current secret code.
Press
CLEAR to clear the code.
Do step 4 to enter new code.
Press ACTION twice
to end setup.
44
• DO NOT forget your secret code.
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]