Panasonic PV-D4752 - Manual (Page 34)

special VCR Features (continued)
Remote Warning Feature
If Multi-brand feature Is used (p. 28), and this feature is
set to on, a warning appears whenever an invalid key
is pressed in TV, DSS or CABLE mode.
'Important; If a remote control button does not work
when pressed, press the VCR button
on the remote and try the button again.
1
Press ACTION*
to display MENU.
SET CLOCK
SET UP CHANNEL
iDIOMA/LANQUE : ENGLISH
VCR’S OUTPUT CH:3
Press AW
to select “SET UP VCR,”
and
press SET.
SET UP VCR
REPEAT PLAY
AUTO SHUT-OFF
Press AW
to select
“REMOTE WARNING,” and
press SET
to set “ON” or “OFF.”
• If “OFF,” remote warning will not appear
when invalid key is pressed.
Press ACTION twice
to return to normal screen.
INPUT
STOP
PAUSE/
STILL
ACTION
SELECT
SET
TAPE
POSITION
REC
Tape Position and Tape Status Feature
To find out the present tape position and amount of tape remaining.
Tape position is dispiayed for VHS-C Cassettes type, tapes
under 30 minutes, and some other tapes, but the position is
not correct.
1 Press TAPE POSITION
to detect current tape position.
[ DETECTING TAPE POSITION
J ■ “DETECTING TAPE POSITION” is displayed
only when a cassette is first inserted, and it
takes several seconds for correct tape
position to appear.
' The present tape position indication and
amount of tape remaining (according to
tape speed) is displayed.
' Tape remaining time display may not be
precise.
Press TAPE POSITION
to return to normal screen.
This function cannot display exact amount of tape remaining for
tapes 30 minutes or less, or for tapes over 120 minutes in length.
34
For assistance, please call: 1-800-211-PANA(7262) or send e-mail to: [email protected]