STIEBEL ELTRON Accelera 300 E - Manual (Page 5)

www.stiebel-eltron-usa.com Accelera 220-300 E | 5
EN
GL
ISH
14˝
(0.4 m)
2´ (0.6 m)
8˝ (0.2 m)
6´ (1.8 m)
Air flow
intake
Air flow
intake
Air flow
exhaust
Air flow
exhaust
2´ (0.6 m)
Air flow
intake
Air flow
exhaust
6´ (1.8 m)
Minimum room volume:
800 ft
2 , 10´ x 10´ x 8´
(22.7 m 2 , 3 m x 3 m x 2.4 m)
Acceptable positioning, vent parallel to a wall:
Acceptable positioning, vent parallel to a wall in a corner:
An object
next to the
unit must
be less than
42˝ high
2´
(0.6 m)
2´
(0.6 m)
8˝ (0.2 m)
8˝
(0.2 m)
6´
(1.8 m)
≤42˝
(1.1 m)
› Do not install in a room
with less than 800 cubic
feet of total volume.
› Do not install with the air
exhaust pointing at a wall
or any surface closer than
6 feet away.
› Do not install with the air
intake pointing to a wall or
any surface closer than 2
feet away.
› If you are installing the
water heater next to
another appliance, it
cannot be taller than 42
inches. Otherwise, it will
obstruct air fl ow to and
from the unit.
› Failure to follow
installation instructions
will void the factory
warranty.
QUICK START-UP GUIDE
Required room dimensions and clearances