360 Systems MAXX2400HD - Manual (Page 39)

Page 38 MAXX-2400HD Owner’s Manual
Selecting a Video Format
The MAXX-2400HD can record and play video in four high definition video formats:
1080i @ 59.94 Hz 1080i @ 50 Hz
720p @ 59.94 Hz 720p @ 50 Hz
To select a video format, go to Edit/Configure/Timing dialog on the GUI. Select a check-box for the
rate at which you will record or play. A reminder will appear, to stop video on all channels and
prepare for automatic restart in the new format. This takes at least 12 seconds, so the change should
not be performed on-air.
Figure 9 – Selecting Video Format
The MAXX-2400HD must be set to operate in one format at a time; it does not play mixed
video formats when the video format is changed, the only files visible on the GUI will be those
recorded in the currently-selected video format. Files in another format will become visible when the
server is placed in that operational mode. . For clarity, it is a good idea to store content in directories
that are separated according to video format.
Audio is recorded and played at the industry standard of 48K, regardless of the video format
selected.