360 Systems MAXX2400HD User Manual

Page 89

Advertising
background image

Page 88

MAXX-2400HD Owner’s Manual

Entering Network Parameters

From the GUI’s main menu bar, Click EDIT>CONFIGURE>NETWORK. The following

screen appears. Make sure the basic network parameters have been entered.

Figure 38 - Network Configuration Screen


Disable Network: uncheck
Host Name: (Any name will suffice, but since this name appears on each line of the server’s
diagnostic logs, it is a good idea to keep this short.) The name should also be unique from other
devices on the network.

If “Use DHCP” if not checked, then enter a fixed IP address compatible with your local subnet. For
example,
IP Address:

192.168.1.20

Net Mask: 255.255.255.0
Default Router: 192.168.1.1

The Name Servers and NTP Servers fields provide the information needed to reach the public time
servers.

The NTP Servers field contains a list of time servers, either by numeric IP address, or by site name
(URL). Entries are separated by spaces.

Advertising