360 Systems MAXX2400HD User Manual

Page 56

Advertising
background image

MAXX-2400HD Owner’s Manual

Page 55

Enabling/Disabling DHCP [X]
Enabling DHCP will configure the network interface automatically.
If the DHCP box is not selected, the user may then manually enter assignments in the following
windows:

• IP Address

( Example: 192.168.1.20 )

• Net Mask

( Example: 255.255.255.0 )

• Default Router

( Example: 192.168.1.1 )

The Host Name and NTP domain name may be a fully qualified domain name, such as
edit1.mydomain.com. All other manually configured addresses must be properly formatted IP
addresses.

Saving Network Configuration

Click on OK, APPLY, or CANCEL to accept or abandon new entries.
The IP address of the system is displayed in the upper-left corner of the GUI at the end of the main
window title.

The server is designed to be used in a private dedicated video network. A firewall must be
used in systems that require internal security or connection to public networks.
Consult with a network security specialist for guidance on the best hardware, programming
and practices for your facility’s requirements.

Advertising