360 Systems MAXX2400HD - Manual (Page 57)

Page 56 MAXX-2400HD Owner’s Manual
Setting the Date and Time
Click EDIT->CONFIGURE->DATE/TIME. The dialog below appears.
Figure 19 - Time/Date Configuration Screen
Select the REGION and ZONE according to your geographic location or time zone. Use the scroll-
bar as necessary, and then click on the desired value.
Set the TIME and DATE by clicking on the Time/Date field and navigating the clock and calendar.
Check Automatic Updates to enable automatic updates using the Network Time Protocol
(NTP). Refer to Network Time Protocol on page 86.
Note: A System Restart is required for a Time Zone change to take effect.