360 Systems MAXX2400HD - Manual (Page 44)

MAXX-2400HD Owner’s Manual Page 43
Making a Crash Recording
Press Record whenever Channel 1 reports that it is IDLE.
Making a Named Recording
A. From the Channel 1 Transport Window, Select FILE>NEW. The dialog of Figure 12 appears.
Figure 12 - Channel 1 Clip Navigator "New" mode
B. Enter a clip name using the keyboard. Up to 31 characters may be used. Spaces are allowed;
however, some characters other than upper or lower case letters and numbers may not be
used. These characters will not enter into the name field when typed. They include * ( ) + = ;
: ‘ “ < > , . / and ? A list of existing clips will appear in the large window, and can be used as
a name reference when creating new clip names.
C. The Channel 1 transport Window will display the words IDLE CUEING for two seconds or
less. When ready to record, the Channel 1 Transport Window will display IDLE READY.
Note: File naming is case sensitive. Upper case letters sort before lower case. The name FILE sorts
in the order shown, based on differing capitalization: FILE, File, fiLe, and file. When using the
server with automation systems or other remote controls, it is not a good practice to distinguish files
only by differences in case.