360 Systems MAXX-2400SD User Manual
Page 20
____________________________________________________________________________________
Page 20
MAXX 2400 Owners Manual
Figure 4 – AXP Expansion Module Connections
Each of the pairs of connectors corresponds to one of the video channels’ inputs or outputs.
Depending on internal jumper settings, each pair can be either:
• Two channels of balanced analog audio with a reference level of +4 dBu.
OR
• Four channels of AES/EBU digital audio (two channels per connector).
The table below shows the functions of the connectors for ANALOG and DIGITAL modes.
Connector
ANALOG
DIGITAL
1. Video Channel 1 Audio Input #1
Channel 1 (Left)
Channels 1 & 2 (Main)
2. Video Channel 1 Audio Input #2
Channel 2 (Right)
Channels 3 & 4 (Aux)
3. Video Channel 3 Audio Output #1
Channel 1 (Left)
Channels 1 & 2 (Main)
4. Video Channel 3 Audio Output #2
Channel 2 (Right)
Channels 3 & 4 (Aux)
5. Video Channel 1 Audio Output #1
Channel 1 (Left)
Channels 1 & 2 (Main)
6. Video Channel 1 Audio Output #2
Channel 2 (Right)
Channels 3 & 4 (Aux)
7. Video Channel 2 Audio Output #1
Channel 1 (Left)
Channels 1 & 2 (Main)
8. Video Channel 2 Audio Output #2
Channel 2 (Right)
Channels 3 & 4 (Aux)
9. Video Channel 3 Audio Output #1
Channel 1 (Left)
Channels 1 & 2 (Main)
10. Video Channel 3 Audio Output #2
Channel 2 (Right)
Channels 3 & 4 (Aux)
11. Video Channel 4 Audio Output #1
Channel 1 (Left)
Channels 1 & 2 (Main)
12. Video Channel 4 Audio Output #2
Channel 2 (Right)
Channels 3 & 4 (Aux)
About the Audio I/O
The MAXX 2400 provides audio inputs and outputs in three formats:
• Balanced analog audio at a reference level of +4 dBu, corresponding to a digital level
of -20dbFS.
• Digital audio in 24 bit AES/EBU format per AES-3-2000. 48 KHz sample rate.
• SDI embedded audio, 20 bit, 4-channels on SDI audio group 1, channels 1, 2, 3 and 4.