360 Systems MAXX-2400SD - Manual (Page 76)

____________________________________________________________________________________
Page 76 MAXX 2400 Owners Manual
If you will be connecting directly to a PC or Laptop, configure the ImageServer as IP address
192.168.1.3, net mask 255.255.255.0 and disable DHCP. In the PC, double click on the Local
Area Connection Icon in the system tray or in the Network and Dial-Up Connections in the
Control Panel. In the Local Area Connection Status dialog, click on Properties. Click on the item
“Internet Protocol (TCP/IP)” and click on Properties again. In Local Area Connection Properties,
turn off “Obtain an IP Address Automatically“ by selecting “Use the Following IP Address” and set
the address to 192.168.1.2, net mask to 255.255.255.0.
No hardware settings are available or needed. The NET-1 port automatically negotiates port speed
and configures transmit and receive connections, and does not need a “crossover” cable when
connecting directly to a PC.
The actual transfer rate depends on the format of the files being transferred, the number and bit
rate of video streams being played. In practice, broadcast content encoded at 12 Mb/sec should
transfer at a rate five times faster than real time, even while the server is playing video.
Logging in to Maxx 2400
Maxx 2400 allows only for anonymous login. Using one of the FTP clients shown in Table 2, enter
“anonymous” as the user name or check the “anonymous” checkbox on the login screen.
When the FTP client is connected, it will display the Clips in the main directory and all of the sub-
folders. Clips can be uploaded, downloaded, deleted and renamed using standard FTP client
commands. Clips in the subfolders can be displayed by entering those folders. Consult the
documentation for your FTP client for information on changing folders.
The MAXX 2400 will support two simultaneous data transfers (2 in, 1 in and 1 out or 2
out.) There can be up to two additional FTP sessions active for other purposes such as
viewing the directory.
File Sizes Reported in Listing
The size of a clip reported in the file listing is the amount of video and audio data included
between the In/Out points.
Overwriting Files
It is the responsibility of the client application (Windows Explorer, FlashFXP, etc) to ask the user if
they want to overwrite a file.
Note that some types of files (such as .avi and Targa) change their file extensions when they have
been transferred into the ImageServer. In these cases, the FTP client cannot warn of a file
overwrite. It is important to take extra care when using these types of files not to overwrite
necessary files.
Interrupted and Resumed Transfers
If a transfer is interrupted (for example, by a dropped connection) the amount of the file that has
been transferred is kept on the target system. Resumption of a partial transfer is possible if the FTP
client supports it.