360 Systems MAXX-2400SD User Manual

Page 47

Advertising
background image

____________________________________________________________________________________

MAXX 2400 Owners Manual

Page 47

Setting the Date and Time

Click EDIT->CONFIGURE->DATE/TIME. The screen of Figure 19 appears.

Figure 19 - Time/Date Configuration Screen


Select the REGION and ZONE according to your geographical location and time zone by scrolling
with the scroll-bar as necessary and then clicking on the selected value.

Set the TIME and DATE by clicking on the Time/Date field and navigating the clock and calendar.

Check Automatic Updates to enable automatic updates using the Network Time Protocol
(NTP). Refer to Using The Network Time Protocol on Page 79.


Note: A System Restart is required for a Time Zone change to take effect

Advertising