360 Systems MAXX-2400SD - Manual (Page 70)

____________________________________________________________________________________
Page 70 MAXX 2400 Owners Manual
• Embedded audio is always included in the SDI stream on playback, and audio will
simultaneously appear on the AES/EBU or analog audio outputs, as selected by the audio card
option jumpers. When analog audio is selected, only channels 1 & 2 will be available at the
analog output. Embedded channels 3 and 4 are not affected.
• User bits in the SDI embedded audio stream are not supported.
• 20 bit Dolby E is supported
Configuring Embedded Audio
From the GUI window, click OPTIONS->CONFIGURE from the Transport View of Channel 1 or
Channel 3. The Channel Configuration window ( Figure 32 ) will appear. Use this window to
configure Embedded Audio.
Figure 32 - Channel Configuration Screen
Setting the Input Source
Three buttons select the input source for video and audio. These are:
• CVBS/Discrete Audio (composite video with AES/EBU or analog audio inputs)
• SDI/Discrete Audio (serial digital video with AES/EBU or analog audio inputs)
• SDI/Embedded Audio (serial digital video with embedded audio)
The discrete audio inputs can be either: two stereo pairs (4 channels) of AES/EBU digital audio, or
one stereo pair of +4dBu analog inputs, as determined by jumpers on the audio card.
Regardless of the input selected, audio will always appear in the SDI output stream as embedded
audio, and at the discrete outputs as either AES/EBU (digital) or as +4 dBu balanced analog audio.