Cisco IAD2430 - Manual (Page 67)

3-31
Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide
OL-4234-06
Chapter 3 Installing Cisco IAD2430 Series IADs
Ports, Connectors, and Pinouts
Figure 3-29 Digital Voice Connection
Step 2 Connect the RJ-48 jack to the digital telephone equipment (PBX).
Ports, Connectors, and Pinouts
Table 3-5 summarizes the cable connections between Cisco IADs and the network and user interfaces.
Remote Terminal Connections (If Applicable)
If you are configuring a Cisco IAD from a remote location, connect the modem and the remote PC or
terminal to the telephone network as described in this section.
88999
RJ-48 T1 cable
Digital PBX
or channel bank
Table 3-5 Cable Use Reference Table
Cisco IAD Port Port Color Connector/Cable Interface To
Console Light blue RJ-45/rollover PC
ASCII terminal
Auxiliary Black RJ-45/rollover Modem
Fast Ethernet Yellow RJ-45/Fast Ethernet LAN
Serial 0 Blue Cisco 12-in-1 serial cable EIA/TIA-530
EIA/TIA-530A
EIA/TIA-232
EIA/TIA-449
V.35
X.21
T1/E1-WAN Light green RJ-48/Straight-through T1/E1 trunk
T1/E1-PBX digital voice Black RJ-48/Straight-through Digital PBX, T1/E1
Analog voice multiport Gray RJ-21X/50-conductor Distribution panel for analog telephone,
fax, PBX, or central office line