Fig. 146: select destination module dialog box, Fig. 147: select station address dialog box, Fig. 148: downloading configuration prompt – Hardy HI 3010 Filler/Dispenser Controller User Manual
Page 66: Fig. 149: initialization complete, Fig. 150: configuration menu/selecting setup, Ect destination module dialog box, Lect station address dialog box 52, Wnloading configuration prompt, Tialization complete, Onfiguration menu/selecting setup
HI-3000 Series
52
Operation and Installation
FIG. 146: SELECT DESTINATION MODULE
DIALOG BOX
Step 13. Click on OK. The Select Station Address Dialog
box appears. (See Fig. 147)
FIG. 147: SELECT STATION ADDRESS DIALOG
BOX
Step 14. Click on OK. A prompt appears indicating that the
Step 7 is downloading the configuration to the PLC.
(See Fig. 148)
FIG. 148: DOWNLOADING CONFIGURATION
PROMPT
Step 15. When the download is complete the HW Config
dialog box should look something like this. (See
Fig. 149)
FIG. 149: INITIALIZATION COMPLETE
Step 16. Initialization is complete.
Selecting the Profibus Node Address from the
Front Panel
Step 1. At the front panel click on the Setup/3 button. The
Configuration Menu appears. (See Fig. 150)
FIG. 150: CONFIGURATION MENU/SELECTING
SETUP