KEYENCE LV-N10 Series - Manual (Page 45)

3
Ba
sic
Oper
ati
on
3-21 - Digital Laser Sensor LV-N10 Series User's Manual -
3-6
Initialization
The sensor amplifier can be reset to the factory default settings.
1
Press and hold the [SET] and [PRE-
SET] buttons simultaneously for 3 sec-
onds or more.
The "rSt" display flashes.
2
Press the [MODE] button.
3
Press the button to display "init".
4
Press the [MODE] button.
After the settings are initialized, the screen
displays "oK", which is then replaced with
the current received light intensity.
Refer to "Factory Default Setting (Default Value) List" on page 6-5.
Initialization of Settings (Reset to Initial Values)
Reference