KEYENCE IV-M30 - Manual (Page 6)

6
IV Series (Monitor) - IM_E
2
Adjust the position of the DIN mounting adapter
and the DIN rail by pulling down the stopper of the
adapter, and then push up the stopper to lock it.
Stopper
z „ Unmounting from the DIN mounting adapter
Unlock the monitor from the DIN mounting adapter by pulling
toward the unlock button. And slide up to unmount the
monitor mounted to the adapter.
Unlock
Cables
Connecting the power cable of the monitor
1
Align the arrow mark of the power cable and the
direction of the front monitor, and connect the
cable to the monitor.
Arrow mark
2
Turn the screw-on connector in clockwise direction
to tighten it.
3
Wire to the power supply.
Monitor power cable
(2m/5m/10m)
Blue (0V)
Brown (DC24V)
DC24V
Cable specification Brown/Blue: AWG24
Connecting the sensor and the monitor
z „ Connecting directly
Connect the sensor and monitor using the monitor cable.
Monitor cable
(2m/5m/10m/20m)
For details on connecting the monitor cable, refer to
“Connecting the monitor cable/Ethernet cable” (Page 7).