KEYENCE SR-1000 Series - Manual

1 E SR-1000-IM
Autofocus Code Reader (Fixed Type)
SR-1000 Series
Instruction manual
Introduction
Read this instruction manual before using the product in order to achieve
maximum performance.
After reading it, keep the manual always at hand for future reference.
„ Symbols
The following symbols alert you to important messages. Be sure to read
these messages carefully.
Important It indicates cautions and limitations that must be followed during operation.
Point It indicates additional information on proper operation.
Reference It indicates tips for better understanding or useful information.
Indicates the reference pages in this manual or the reference pages in separate manuals.
Safety Information for SR-1000 Series
„ General Precautions
Safety Precautions on LED Product
Precautions on Proper Use
Precautions on Proper Use
„ CE Marking
Keyence Corporation has confirmed that this product complies with the
essential requirements of the applicable EC Directive, based on the
following specifications.
Be sure to consider the following specifications when using this product
in the Member State of European Union.
z EMC Directive (2004/108/EC)
• Applicable standards
EMI : EN61326-1, Class A
EMS : EN61326-1
• The length of cable connected to the power supply connector must
be less than or equal to 30 m.
• This product is intended to be used in an industrial electromagnetic
environment.
These specifications do not give any guarantee that the end-product with
this product incorporated complies with the essential requirements of
EMC Directive. The manufacturer of the end-product is solely responsible
for the compliance on the end-product itself according to EMC Directive.
z Low-Voltage Directive (2006/95/EC)
• Applicable standard : EN62471
• Indoor use only.
„ CSA Certificate
This product complies with the following CSA and UL standards and has
been certified by CSA.
• Applicable standard : CAN/CSA C22.2 No.61010-1
UL61010-1
• Be sure to consider the following specifications when using this product
as a product certified by CSA.
• Overvoltage category
• Use this product under pollution degree 2.
• Use this product at the altitude of 2000 m or less.
• Indoor use only.
• When using this product, use the following power supply.
CSA or UL certified power supply that provides Class 2 output as
defined in the CEC (Canadian Electrical Code) and NEC (National
Electrical Code), Or CSA or UL certified power supply that has been
evaluated as a Limited Power Source as defined in CAN/CSA-C22.2
No. 60950-1/UL60950-1.
„ Radio Waves Act in South Korea
Class A Equipment
This is a class A product. In a domestic environment this product may
cause radio interference in which case the user may be required to take
adequate measures.
Note: This caution is effective for the Korean Radio Act only.
A 급 기기 ( 업무용 방송통신기자재 )
이 기기는 업무용 (A 급 ) 전자파적합기기로서 판매자 또는 사용자는 이
점을주의하시기 바라며 , 가정외의 지역에서 사용하는 것을 목적으로 합
니다 .
It indicates a hazardous situation which, if not avoided, will result in death or
serious injury.
It indicates a hazardous situation which, if not avoided, could result in death
or serious injury.
It indicates a hazardous situation which, if not avoided, could result in minor
or moderate injury.
It indicates a situation which, if not avoided, could result in product damage
as well as property damage.
• Do not use this product for the purpose to protect a human body or a part
of human body.
• This product is not intended for use as explosion-proof product. Do not
use this product in hazardous location and/or potentially explosion
atmosphere.
• You must verify that the SR-1000 Series are operating correctly in terms of
functionality and performance before the start and the operation of the
SR-1000 Series.
• We recommend that you take substantial safety measures to avoid any
damage in the event of a problem occurring.
• KEYENCE never warrant the function or performance of the SR-1000
Series if it is used in a manner that differs from the SR-1000 Series
specifications contained in this instruction manual of if the SR-1000
Series are modified by yourself.
• When the SR-1000 Series is used in combination with other instruments,
functions and performance maybe degraded, depending on operating
conditions and the surrounding environment.
• If the equipment is used in a manner not specified by the manufacturer.
the protection provided by the equipment may be impaired.
• Use of controls or adjustments or performance of procedures other than
those specified herein may result in hazardous radiation exposure.
• Follow the instructions mentioned in this manual. Otherwise, injury to the
human body (eyes and skin) may result.
• Do not stare into the beam.
• Do not disassemble this product.
LED emission from this product is not automatically stopped when it is
disassembled.
• Do not view directly with optical instruments. Viewing the LED output
with certain optical instruments (for example, eye loupes, magnifiers
and microscopes) within a distance of 100 mm may pose an eye hazard.
96M13020
DANGER
WARNING
CAUTION
NOTICE
WARNING
CAUTION
NOTICE
CAUTION
• Do not use a voltage other than that described in the specifications with
the SR-1000 Series. Doing so may cause damage to the unit.
• Be sure to turn off the power to devices attached to the SR-1000 Series
when you plug in or unplug the cables. Failure to do so may cause damage
to the SR-1000 Series.
• Do not disassemble or modify the SR-1000 Series. Doing so may cause
damage to the unit.
• Place cables as far away as possible from high-voltage lines and power
lines. Otherwise, electrical noise can be generated that may cause a
product failure or malfunction.
• The SR-1000 Series is a precision instrument. Do not impact or drop the
instrument. Pay particular attention when transporting or installing the unit.
• Do not carry the SR-1000 Series by holding its cables. This may cause cable
breaks or damage to the unit due to the impact of bumping each other.
• Do not allow water, oil, dust, or other foreign substances to stick to the
scanner. This may cause read errors. Use a soft, dry cloth to wipe any
substance from the scanner. (Do not use a cloth dipped in alcohol or other
cleaning agent.)
• Do not turn off the power of the SR-1000 Series while accessing files. The
internal data may be corrupted.
NOTICE