KEYENCE N-R4 - Manual

1 E N-R4-IM
Dedicated Communication Unit
RS-422A/485 Output Type
N-R4
Instruction Manual
■ General precautions
• At startup and during operation, be sure to check that the
functions and performance of the N-R4 is operating properly.
• We recommend that you take substantial safety measures to
avoid any damage in the event a problem occurs.
• If the N-R4 is modified or used in any way other than described in
the specifications, its function and performance cannot be
guaranteed.
• When the N-R4 is used in combination with other instruments, the
function and performance may be effected by operating conditions
and the surrounding environment.
• Do not use the N-R4 for the purpose of protecting the human
body.
• The information contained in this manual is subject to change
without notice.
■ Notice
When this product is used under the circumstances and operating
environments described below, adhere to the limitations of the ratings,
take adequate measures to ensure safety such as fail-safe installations
and consult a KEYENCE sales representative.
• For use under circumstances or environments which are not
described in the manual
• For use with nuclear power control, railway, aircraft, vehicles,
incinerators, medical equipment, entertainment equipment, safety
devices etc.
• For use in applications where death or serious property damage is
possible and extensive safety precautions are required.
■ For properly using the product
Do not install the N-R4 in the following locations:
• Locations subject to direct sunlight
• Locations where the surrounding air temperature is outside the
range of 0
to +50 °C or locations subject to condensation as the
result of severe changes in temperature
• Locations where the ambient humidity is outside the range of 35
to 85%RH.
• Locations subject to corrosive or flammable gases
• Locations subject to dust, salts, iron dust, or oil smoke
• Locations subject to shock or vibration
• Locations subject to exposure of water, oil, or chemicals
• Locations where strong magnetic or electric fields are generated
■ UL certification
The N-R4 complies with the following UL/CSA standards and has
obtained the UL/C-UL certification.
• Applicable standards UL508, UL60950-1
• UL File No. E207185, E167973
• UL category NRAQ/NRAQ7, NWGQ2/NWGQ8
Be sure to observe the following installation and environment conditions.
• Pollution degree 2
• Overvoltage category I
Caution - Do not connect directly to the branch circuit. This product must
be supplied power by a suitable, approved isolated transformer or power
supply not exceeding 200 VA max.
Attention - Ne raccordez pas l'unité directement au circuit de dérivation.
Ce produit doit être alimenté par un transformateur adapté, isolé et
approuvé ou une alimentation ne dépassant pas 200 VA.
■ FCC regulations
The N-R4 complies with the following FCC EMI regulations.
• FCC Part 15 Subpart B, Class B digital device
■ Canada IC (Industry Canada) regulations
The N-R4 complies with the following IC EMI regulations.
• ICES-003, Class B digital apparatus
■ CE marking
The N-R4 complies with the following essential requirements of the EU
Directive.
• EMC Directive (2004/108/EC)
The following harmonized standards are applied to this product in order
to confirm the compliance.
• Applicable standards (EMI) EN55011, Class A
EN55022, Class B
• Applicable standards (EMS) EN61000-6-2
EN61000-6-1
* The length of the communication and power cables should be less than 30 m.
DANGER
Failure to follow these instructions may lead to death or
serious injury.
WARNING Failure to follow these instructions may lead to injury.
CAUTION
Failure to follow these instructions may lead to product
damage (product malfunction, etc.).
Note Provides additional information on proper operation.
TIPS
Indicates useful information or information that aids
understanding of text descriptions.
For Safely Using the Product
CAUTION
• Do not use the N-R4 in an environment subject to
flammable, explosive, or corrosive gases.
• Be sure that all screws are tightened securely.
• Use crimp contacts of the specified size for wiring.
• The N-R4 uses a 24 VDC power supply. Using a power
supply outside this range or an AC power supply may
cause product failure.
• Do not disassemble or modify the N-R4. This may cause
product failure.
• Locate the cables as far as possible from high-voltage
lines and power lines. Otherwise, generated noise may
cause product failure or malfunctions.
• The N-R4 is a precision instrument. If the unit is
dropped or shock is applied, it may be damaged. Use
caution when unpacking, carrying, and mounting.
• Be sure to observe all warnings, cautions, and
precautions specified in the manual.
96M13456
Foreign Regulations and Standards
Package Contents List
Main unit Instruction manual
Connector for the RS-422A/485 Label for the connectors
(used when wiring RS-422A)
For 422 connector
1 E N-R4-IM
Dedicated Communication Unit
RS-422A/485 Output Type
N-R4
Instruction Manual
■ General precautions
• At startup and during operation, be sure to check that the
functions and performance of the N-R4 is operating properly.
• We recommend that you take substantial safety measures to
avoid any damage in the event a problem occurs. • If the N-R4 is modified or used in any way other than described in
the specifications, its function and performance cannot be
guaranteed.
• When the N-R4 is used in combination with other instruments, the
function and performance may be effected by operating conditions
and the surrounding environment.
• Do not use the N-R4 for the purpose of protecting the human
body.
• The information contained in this manual is subject to change
without notice.
■ Notice
When this product is used under the circumstances and operating
environments described below, adhere to the limitations of the ratings,
take adequate measures to ensure safety such as fail-safe installations
and consult a KEYENCE sales representative.
•
For use under circumstances or environments which are not
described in the manual
• For use with nuclear power control, railway, aircraft, vehicles,
incinerators, medical equipment, entertainment equipment, safety
devices etc.
• For use in applications where death or serious property damage is
possible and extensive safety precautions are required.
■ For properly using the product
Do not install the N-R4 in the following locations:
• Locations subject to direct sunlight • Locations where the surrounding air temperature is outside the
range of 0 to +50qC or locations subject to condensation as the result of severe changes in temperature • Locations where the ambient humidity is outside the range of 35
to 85%RH. • Locations subject to corrosive or flammable gases • Locations subject to dust, salts, iron dust, or oil smoke • Locations subject to shock or vibration • Locations subject to exposure of water, oil, or chemicals • Locations where strong magnetic or electric fields are generated
■ UL certification
The N-R4 complies with the following UL/CSA standards and has
obtained the UL/C-UL certification.
•
Applicable standards UL508, UL60950-1 • UL File No. E207185, E167973 • UL category NRAQ/NRAQ7, NWGQ2/NWGQ8 Be sure to observe the following installation and environment conditions.
• Pollution degree 2 • Overvoltage category I Caution - Do not connect directly to the branch circuit. This product must
be supplied power by a suitable, approved isolated transformer or power
supply not exceeding 200 VA max.
■ FCC regulations
The N-R4 complies with the following FCC EMI regulations.
•
FCC Part 15 Subpart B, Class B digital device ■ Canada IC (Industry Canada) regulations
The N-R4 complies with the following IC EMI regulations.
•
ICES-003, Class B digital apparatus ■ CE marking
The N-R4 complies with the following essential requirements of the EU
Directive.
•
EMC Directive (2004/108/EC) The following harmonized standards are applied to this product in order
to confirm the compliance.
• Applicable standards (EMI) EN55011, Class A
EN55022, Class B
• Applicable standards (EMS) EN61000-6-2
EN61000-6-1 * The length of the communication and power cables should be less than 30 m.
DANGER Failure to follow these instructions may lead to death or
serious injury.
WARNING Failure to follow these instructions may lead to injury.
CAUTION Failure to follow these instructions may lead to product
damage (product malfunction, etc.).
Note Provides additional information on proper operation.
TIPS Indicates useful information or information that aids
understanding of text descriptions.
For Safely Using the Product
CAUTION
• Do not use the N-R4 in an environment subject to flammable, explosive, or corrosive gases. • Be sure that all screws are tightened securely.
• Use crimp contacts of the specified size for wiring.
• The N-R4 uses a 24 VDC power supply. Using a power
supply outside this range or an AC power supply may
cause product failure. • Do not disassemble or modify the N-R4. This may cause product failure.
96M00269
CAUTION
• Locate the cables as far as possible from high-voltage lines and power lines. Otherwise, generated noise may
cause product failure or malfunctions. • The N-R4 is a precision instrument. If the unit is dropped or shock is applied, it may be damaged. Use
caution when unpacking, carrying, and mounting. • Be sure to observe all warnings, cautions, and precautions specified in the manual.
Foreign Regulations and Standards
Package Contents List
Main unit Instruction manual
Connector for the RS-422A/485 Label for the connectors
(used when wiring RS-422A)
For 422 connector
1 E N-R4-IM
Dedicated Communication Unit
RS-422A/485 Output Type N-R4
Instruction Manual
■ General precautions
• At startup and during operation, be sure to check that the
functions and performance of the N-R4 is operating properly.
• We recommend that you take substantial safety measures to
avoid any damage in the event a problem occurs.
• If the N-R4 is modified or used in any way other than described in
the specifications, its function and performance cannot be
guaranteed.
• When the N-R4 is used in combination with other instruments, the
function and performance may be effected by operating conditions
and the surrounding environment.
• Do not use the N-R4 for the purpose of protecting the human
body.
• The information contained in this manual is subject to change
without notice. ■ Notice
When this product is used under the circumstances and operating
environments described below, adhere to the limitations of the ratings,
take adequate measures to ensure safety such as fail-safe installations
and consult a KEYENCE sales representative.
• For use under circumstances or environments which are not
described in the manual
• For use with nuclear power control, railway, aircraft, vehicles,
incinerators, medical equipment, entertainment equipment, safety
devices etc.
• For use in applications where death or serious property damage is
possible and extensive safety precautions are required. ■ For properly using the product
Do not install the N-R4 in the following locations:
• Locations subject to direct sunlight
• Locations where the surrounding air temperature is outside the
range of 0 to +50qC or locations subject to condensation as the result of severe changes in temperature
• Locations where the ambient humidity is outside the range of 35
to 85%RH.
• Locations subject to corrosive or flammable gases
• Locations subject to dust, salts, iron dust, or oil smoke
• Locations subject to shock or vibration
• Locations subject to exposure of water, oil, or chemicals
• Locations where strong magnetic or electric fields are generated ■ UL certification
The N-R4 complies with the following UL/CSA standards and has
obtained the UL/C-UL certification.
• Applicable standards UL508, UL60950-1 • UL File No. E207185, E167973 • UL category NRAQ/NRAQ7, NWGQ2/NWGQ8 Be sure to observe the following installation and environment conditions.
• Pollution degree 2
• Overvoltage category I Caution - Do not connect directly to the branch circuit. This product must
be supplied power by a suitable, approved isolated transformer or power
supply not exceeding 200 VA max. ■ FCC regulations
The N-R4 complies with the following FCC EMI regulations.
• FCC Part 15 Subpart B, Class B digital device ■ Canada IC (Industry Canada) regulations
The N-R4 complies with the following IC EMI regulations.
• ICES-003, Class B digital apparatus ■ CE marking
The N-R4 complies with the following essential requirements of the EU
Directive.
• EMC Directive (2004/108/EC) The following harmonized standards are applied to this product in order
to confirm the compliance.
• Applicable standards (EMI) EN55011, Class A
EN55022, Class B • Applicable standards (EMS) EN61000-6-2
EN61000-6-1 * The length of the communication and power cables should be less than 30 m.
DANGER Failure to follow these instructions may lead to death or
serious injury. WARNING Failure to follow these instructions may lead to injury. CAUTION Failure to follow these instructions may lead to product
damage (product malfunction, etc.). Note Provides additional information on proper operation. TIPS Indicates useful information or information that aids
understanding of text descriptions. For Safely Using the Product
CAUTION • Do not use the N-R4 in an environment subject to
flammable, explosive, or corrosive gases.
• Be sure that all screws are tightened securely.
• Use crimp contacts of the specified size for wiring.
• The N-R4 uses a 24 VDC power supply. Using a power
supply outside this range or an AC power supply may
cause product failure.
• Do not disassemble or modify the N-R4. This may cause
product failure.
96M00269 CAUTION • Locate the cables as far as possible from high-voltage
lines and power lines. Otherwise, generated noise may
cause product failure or malfunctions.
• The N-R4 is a precision instrument. If the unit is
dropped or shock is applied, it may be damaged. Use
caution when unpacking, carrying, and mounting.
• Be sure to observe all warnings, cautions, and
precautions specified in the manual.
Foreign Regulations and Standards
Package Contents List Main unit Instruction manual Connector for the RS-422A/485 Label for the connectors
(used when wiring RS-422A) For 422 connector