3 overview of the kv-d20, Switching the display mode – KEYENCE KV-D20 User Manual
Page 17
2. Overview and Operation
2
17
2.3
Overview of the KV-D20
The KV-D20 has three display modes: operator mode, device mode, and system
mode. This section includes an overview of these modes.
Switching the display mode
The KV series has two operating modes: RUN and PROGRAM.
The KV-D20 allows changes among the operator mode, device mode, and system
mode for the RUN and PROGRAM modes respectively.
Customized switches F1 through F4 and customized lamps 1 through 4 can be
used in all modes.
To lock the display screen, press the and
▲
(
▼
) keys simultaneously for three
seconds to set/reset the key-lock function.
Changes between display modes can be limited by setting special utility relays
2508 and 2509 and data memory DM1676.
➮
Refer to "Screen change function" on page 22.
RUN mode
System mode
Device mode
Operator
mode
PROGRAM mode
System mode
Device mode
Operator
mode
kv_d20_manual.p65
08.3.10, 6:07 PM
17